Boat Sales from Prime-Marine-Services boat servicing, (inboard engine and outboard engine servicing)

Boat Servicing,    Engine Servicing,    Outboard Engine Servicing,    Inboard Engine Servicing,   Emergency Boat Recovery,    Mercury Engine Servicing, Honda Engine Servicing,    Mariner Engine Servicing,    Yamaha Engine Servicing,     Mariner Engine Servicing,    Johnson Engine Servicing,    Force Engine Servicing,    Suzuki Engine Servicing,    Evinrude Engine Servicing,    Volvo Engine Servicing,    Tohatsu Engine Servicing,   Nissan Engine Servicing, Mac Engine Servicing,    British Seagull Engine Servicing,    Alisa Craig Engine Servicing,    On-site Servicing for Tenders,    Fishing Boats,    Rigid Inflatable Boats, (RIBS),    Sports Boats,    Canal Boats,    River Boats,    Marine Electrics,    and Marine Instrument Installation

Home
Up
Marine Instruments
Boat Engine Repairs
Boat Sales
Contact
Boat Feedback
Boat Links
PMS Logo Large
RYA Training

Boat Servicing and Repairs:
Winter Service:
 
At the end of the season your engine should be winterised, this is where the fuel is drained and the engine is inhibited, ready for use the following season. Prime Marine Services offer a full Winterisation Service for the boat enthusiast. Our full service includes the following:

 

  • Strip and check water pump.
  • During test run of engine check for smooth operation of all controls and for correct starting both hot and cold.  Check for correct idle speed when hot and for smooth pick up from idle.  Where possible check to ensure engine achieves maximum RPM.
  • Lubricate pivot shaft/all linkages/clamp screws etc.
  • Check condition of anode/trim tab, replace if required.
  • Recoil starter - check condition of rope/lube as required.
  • Fuel filter - strip and clean.
  • Check operation of tilt mechanism.
  • Check adjustment of gear/throttle cables and lubricate all linkages as required.
  • Lubricate propeller shaft.
  • Bleed auto lube pump.
  • Ignition timing - check/adjust linkages as required.
  • Carburetor pilot screws check/adjust.
  • Check operation of on/off neutral interlock switches etc.
  • Drain down carburetors.
  • change gear oil - check for water ingress through seals.
  • Spark plugs - clean/replace as required.
  • Check flywheel nut torque/torque cylinder head.
  • Change oil, filters, and check valves on 4 strokes.

 

 

 

[ Home ] [ Up ]

Send mail to Feedback@boat-servicing.co.uk with questions or comments about this web site.
Copyright © 2005 Prime Maritime Services